Transporter Blind Spot Full Blind Zone System AKTIV 12V

3,5Tonner mit TruckWarn AKTIV Abbiegeassistent

Blind Spot Assist for the van - This system can save lives.

Have full control and above all a full overview of your van. The system of TruckWarn monitors when turning or changing lanes whether other vehicles, cyclists or people are next to your vehicle and shows you the danger by a flashing LED and a clearly audible warning tone. Not only change your angle of vision, but even save a life in the worst case scenario.

Blind spot assistant for vans, buses or special vehicles

This TruckWarn blind spot assistant monitors the blind spot next to the van and is used to effectively avoid accidents when turning or changing lanes. The side scan system detects bicyclists, vehicles or even people who are next to the vehicle and reports them by an LED or additionally warns by an alarm sound if someone is in the danger zone. The 4 side sensors monitor the area that you as a driver cannot see at all or only to a limited extent via the mirrors and thus helps you to get a better overview of your vehicle, even when you have to negotiate unclear intersections.

Blind spot system for retrofitting and subsequent installation in all types of special vehicles, vans or buses

The side scan system has been specially designed to be retrofitted as a blind spot system in all types and designs of vans. The blind spot sensors can be adapted in height and distance to the vehicle conditions in order to optimally cover the blind spot next to the vehicle. The cable lengths have already been selected so that they are optimally designed for most trucks. However, the sensor cables can be easily adapted to the required lengths. This means that the optimum place for the sensors can be determined, depending on the vehicle design or even for special bodies. The sensors can be mounted directly in or also on the bumper, in plastic covers, the underride guard or wheel covers. Special sensor metal holders are optionally available for surface mounting.

Activation via turn signal and brake circuit

TruckWarn's blind spot assistant can be retrofitted in any vehicle. The sensors and warning zones are activated via the turn signal and brake light. Our proven TruckWarn blind spot assistant (24V) is available especially for vans, Sprinters, panel vans, small vans with a 12Volt battery - no matter whether as panel van, flatbed or with special body - as blind spot assistant 12V.

3 adjustable warning zones

The monitoring area can be adjusted, depending on the need and installation height, by simple dip switches on the alarm box, so that the system can be mounted optimally for the blind spot. There are 3 warning zones, to which you can adjust the warning LED and alarm sound according to your needs.

Mounting as blind spot assistant - passenger side

The 4 sensors are mounted on the passenger side. The main sensor is used to monitor the area directly in front of the vehicle, which is a great help especially at pedestrian lights. The three other sensors monitor the area of the "blind spot" which is difficult or impossible to see through the side mirrors. The sensors detect whether there are cyclists or objects such as side barriers directly next to your vehicle. The LEDs indicate possible dangers up to two meters away. If something is in the main warning area (adjustable to 50 cm or 100 cm), this is additionally signaled by a warning tone.

XXL detection range + mounting of the sensors

A total of four sensors are used to monitor the blind spot. The sensors detect an area up to 200 cm next to the vehicle and can distinguish up to 3 warning zones and thus 3 warning levels. Depending on the design of the vehicle, the sensors can be mounted at different heights and at different distances from each other. The sensors can be inserted directly into the plastic skirt or the side wall. Where the sensors cannot be inserted into the housing or plastic parts, our separately orderable body holders can help. The sensor holders can be used optimally to mount the sensors e.g. under the vehicle body box or on / under the underride guard and thus use the optimal space for the side sensors.

TruckWarn Toter-Winkel-Assistent

  • Blind Spot Assistant / Turning Assistant / Turning Aid
  • Blind Spot Assistant ACTIVE 12Volt
  • Item number: 502900981
  • EAN: 4055168111811
  • Manufacturer: H3M Zukunft mit Sicherheit GmbH
  • 12Volt version: Especially for Transporter, Sprinter with a 12Volt vehicle battery
  • Developed in Germany for the European specialised trade
  • Full control of the blind spot
  • Danger detection when turning or changing lanes
  • Warning by LED and warning tone
  • LED display + warning tone individually selectable
  • Warning tone also suitable for hearing aid users
  • Latest ultrasonic technology
  • Sensor detection range adjustable
  • Sensors can be painted in car colour
  • Concealed installation of LED + loudspeaker in the vehicle
  • Waterproof wiring of sensors IP 67
  • 4 sensors for XXL side detection range scan the side of the vehicle
  • Vehicles, cyclists or persons as well as side barriers are detected
  • 3 safety zones as optimum warning zones in the blind spot
  • Activation of warning zones by brake and indicator
  • Even save lives in the worst case


Produkt Kennzeichnungen


Toter-Winkel-Assistent AKTIV 2.3 / 12Volt - AKTIV2.3-12VTW






4 055168 111811

System Kategorie

Mercedes Sprinter 3.5 Tonnen Sensor 1
Mercedes Sprinter 3.5 Tonnen Sensor 1